Profile Picture

 Dr. Basavarajappa Y.H
Dr. Basavarajappa Y.H Professor

Academic Profile

basavarajappa_yh@pestrust.edu.in
Professor
Department of Mechanical Engineering
  • Ph.D in Mechanical engineering
  • M.Tech in Energy system engineering
  • B.E in Automobile Engineering
  • PESITM from July 2016 to till date
  • YENEPOYA institute of technology, Moodbidri, from Jan 2014 to July2016
  • VSM institute of technology, Nippani from July 2012 to Jan 2014
  • Tontadarya college of engineering, Gadag from August 2010 to July 2012
  • K.L.E. Society’s Polytechnic, Hubli from August 1993 to July 2010
  • Rural polytechnic, Haunsbhavi from December 1991 to August 1993
  • ALTERNATIVE FUELS
  • I C ENGINES
  • Guiding 5 research scholars in the area of alternative fuels

    Papers Published

    • Effect of compression ratio, CNG flow rate and injection timing on the performance of dual fuel engine operated on Honge oil methyl ester (HOME) and compressed natural gas (CNG), Ref. No.: RENE-D-15-00156R2, Journal of Renewable Energy, Elseveir publications, (Accepted for publication)
    • “Effect of CNG manifold injection on the performance, combustion and emission characteristics of a CNG-biodiesel dual fuel operation”, International Journal of Automotive Engineering and Technologies, Vol.4, Issue-4, 2015, pp-223-244.
    • “Performance, Combustion and Emission characteristics of a dual fuel engine operated with compressed natural gas (CNG) and Honge and Jatropha biodiesels”. Universal Journal of Petroleum science, Paper science publications, Vol.2, 2014, pp: 46-73.
    • “Effects of compression ratio, swirl augmentation techniques and ethanol addition on the Combustion of CNG–biodiesel in a dual-fuel engine”. International Journal of Sustainable Engineering, Taylor and Francis publication, Volume 7, Issue 1, 2014, pp 55-70.
    • “Effect of hydrogen addition to CNG in a biodiesel operated dual fuel engine. International Journal of Sustainable Engineering, Taylor and Francis publication, 2014, Available online.
    • “Effect of Exhaust Gas Recirculation on the Performance and Emissions of a Dual Fuel Engine Operated on CNG-Biodiesel-Ethanol Blends “, Vol.2 – Issue 12 (December – 2013), International Journal of Engineering Research & Technology (IJERT), ISSN: 2278-0181.
    • “Effect of mixing chamber venturi, injection timing, compression ratio and EGR on the performance of dual-fuel engine operated with HOME and CNG”. International Journal of Sustainable Engineering, Taylor and Francis publication, Volume 5, Issue 3, 2012, pp 265-279.
    • Experimental studies on manifold injected CNG-Biodiesel dual fuel engine, International Journal of Emerging Technologies and advanced Engineering, volume3,special :ICERTSD2013.Feb2013issue, pp 77-83 Available on line at www.ijetae.com.
    • Experimental studies on LPG-Biodiesel dual fuel engine, International Journal of Emerging Technologies and advanced Engineering,volume3,special :ICERTSD2013.Feb2013issue, Available on line at www.ijetae.com
    • “Production of Renewable Liquid Fuels using Different Fuel Processing Methods” Series: Energy Science, Engineering and Technology, Published in ISBN indexed book of “Liquid Fuels: Types, Properties and Production” titled Pub. Date: 2011 4th quarter, ISBN: 978-1-61470-435-5, Status: Available NOVA Science Publishers Inc., Pages: 7 x 10 (NBC – R 6 x 9), New York, USA
    • Combustion characteristics of a 4-stroke CI engine operated on Honge oil, Neem and Rice Bran oils when directly injected and dual fuelled with producer gas induction. Journal of Renewable Energy, Elseveir publications, Volume 34, Issue 7, July 2009, Pages 1877-1884.

    INTERNATIONAL CONFERENCES:
    • “Effect of Injection Timing on the Performance of LHR CI Engine Operated on Jathropa oil and its Ester”. International Conference on Advances in Energy Research (ICAER-2007). 12 – 14 December 2007. Indian Institute of Bombay (IIT).
    • “Experimental Investigations of a LHR Engine With Use Of Non-Volatile Vegetable Oil And Its Methyl Ester”. International Congress on Renewable Energy (ICORE- 2007). (Solar Energy Society of India) 27 – 28, November 2007. New Delhi.
    • “Comparative performance of some esters of edible and non- edible oils in a compressionignition engine” at 15th ISME International Conference on Advances in Mechanical Engineering. Rajiv Gandhi Technological University, Bhopal, MP, India.
    • “Experimental investigations of a LHR engine with use of non-volatile vegetable oil and its methyl ester” at 15th ISME International Conference on Advances in Mechanical Engineering. Rajiv Gandhi Technological University, Bhopal, MP, India (Held on March 18-20, 2008)
    • “Experimental investigations of a single cylinder four-stroke direct injection compression ignition engine when operated on preheated non-edible oils”. International Conference on Energy Engineering (ICEE- 2009). January 7 – 9, 2009, Pondicherry Engineering College. Pondicherry,
    • Effect of Injection Timing, Compression Ratio and EGR on the Performance of Dual Fuel Engine Operated with JOME and Compressed Natural Gas (CNG), Proceedings on International Conference on “Thermal Energy and Environment (INCOTEE 2011), Kalasilingam university, India. COM110, March 24-26,2011.
    • Experimental studies on manifold injected CNG-Biodiesel dual fuel engine Proceedings of the International Conference on Energy Resources and Technologies for Sustainable Development ICERTSD 2013, Feb 7-9, 2013, Howrah, West Bengal, India.

    Conference attended

    • “Performance of Honge (Pongamia Pinnata) Oil Blends in a CI Engine”. National Conference on IC Engines and Combustion”, Combustion Institute. 21–23 December 2005. PP 107-10. Annamalai University. Annamalai Nagar. Chidambarum. Pandichery.
    • “Performance Evaluation of CI Engine with Non-Edible Oils As Substitute Fuels”, National Conference on Recent Trends in Science and Technology. 26th, 27th and 28th May 2005. Dr. M.G.R Educational and Research Institute. Madhurvoyal. Chennai (Tamilnadu).
    • “Non-Edible Oils As Biofuels In A CI Engine”, National Conference on Mechanical Engineering Trends. COMET-2006. 19-20 May 2006. Bellary Engineering College. Bellary. Karnataka.
    • “Biodiesel Production From Non-Edible Oils”, National Conference on Recent Trends In Energy Engg and Management. 2 – 3rd March 2007. Tatyasaheb Kore College of Engg. Warana nagar. Kolhapur. Maharastra -State.
    • “Performance Evaluation Of CI Engine With Non-Edible Oils As Substitute Fuels”, National Conference for Research Scholars. NCRS-2007. 12 –13, March 2007. Basaveshwar Engineering College. Bagalkot. Karnataka.
    • Performance Evaluation of Compression Ignition Engine Working on CNG – Non Edible oil Dual Fuel Mode. National Conference on Emerging Trends in Mechanical Engg. ETIME- 2008, 28-29 August, 2008, P No 79, BMSCE, Bangalore.
    • Performance, combustion and emissions characteristics of a single cylinder compression ignition engine operated on Ethanol-Biodiesel blended fuels, XXI National Conference on IC Engines and Combustion. 10th -12th Dec 2009, Combustion Institute, BIET, Davangere. Karnataka.

  • Attended Two week short term training program (STTP) on “Re-Engineering the Organization” held on 11th June 2001- 23rd June 2001 held at GPW, Vidyanagar, Hubli.
  • Attended One week training program on “Accreditation Awareness Program” held on 20th Oct 2001 to 25th Oct 2001 at K.L.E Society’s Polytechnic College. Vidyanagar. Hubli.
  • Attended short term training program (STTP) on “Organizational Development” held on 27th – 30th Oct 2001 at K.L.E Society’s Polytechnic College. Vidyanagar. Hubli.
  • Attended One month training on “Basic Computer Skill (Winows95, MS-Office, C, C++) program”, 20th March2002 – 20th April2002 at APTECH (ASSET International). Vidyanagar. Hubli.
  • Attended Two week short term training program (STTP) on “Environment planning and impact assesment of project” held on 11th Nov 2002- 22nd Nov 2002 held at K.H.K.Institute of engineering, Vidyagiri, Dharwad.
  • Attended one week short term course on “AUTOCAD for Engineering Applications” held on 16th August 2004 -20th August 2004 held at NITTR, Chennai.
  • Participated in Two day workshop on “Strategic planning for Institutional development” held on 1st and 2nd August 2004 held at K.L.E Society’s Polytechnic College. Vidyanagar. Hubli.
  • Participated in Two day National workshop on “Progress in Re-newable energy sources” held on 17th and 18th March 2006 held at STJIT, Ranebennur.
  • Attended a Two day Workshop on “Emerging Trends in Automotive technology”(ETAT-2007) 4th and 5th May 2007 held at B.V.B. College of Engg and Tech. Hubli.
  • Participated in one week “Anchor Team Training Programme to Promote Modern Biomass Technologies” held on 21st May 2007 to 25th May 2007 held at MGIRED, Bangalore.
  • Attended Two week short term training program (STTP) on “Advances in Hybrid energy systems” held on 26th June 2011- 2nd July 2011 held at NIT Calicut.
  • Participated in TEQIP-II sponsered workshop on “New initiatives in development of Technical education” held on 26th Oct 2013 held at BEC, Bagalkot.
  • Attended a Three day Workshop on “Advances in Composite and Nano-Materials” held on 10th April 2014 to 12th April 2014 at B.V.B. College of Engg and Tech. Hubli.
  • Automotive engineering
  • Power plant engineering
  • Energy engineering
  • Turbo machines
  • Applied Thermodynamics
  • Elements of mechanical engineering