Faculty Details

Dr. Manjunath Patel G C

Associate Professor

Email :manjunath.mech@pestrust.edu.in

Educational Qualification :
B.E in Mechanical Engineering, M.Tech in Production Management, Ph.D in Mechanical Engineering (Manufacturing) from NITK, Surathkal
Academic Experience :
8 Years

Dr. Manjunath Patel G C

Associate Professor

Email :manjunath.mech@pestrust.edu.in

Educational Qualification :
B.E in Mechanical Engineering, M.Tech in Production Management, Ph.D in Mechanical Engineering (Manufacturing) from NITK, Surathkal
Academic Experience :
8 Years

  • Materials and Manufacturing Processes
  • Modelling, Simulation and Optimization of Manufacturing Systems
  • Artificial Intelligence based Design and Development of Micro-textured Cutting Tools and Eco-friendly Cutting Fluids for Sustainable Machining of INCONEL 800 - Super Alloy, Vision Group of Science and Technology, Karnataka, INR. 300000 (Three Lakh Rupees), 2 Years, Granted
  • Optimization of high yield biodiesel production from fish oil using nano-catalyst and performance evaluation in diesel engine, VTU Competitive Research Funding Scheme, INR. 200000 (Two lakh rupees), 10 Months, Completed
  • Modelling and optimization of sand mould properties utilizing industrial wastes as an alternate moulding material, Karnataka State Council for Science and Technology, IISC, Bangalore, INR. 7000 (Seven thousand rupees), 6 Months, Completed
  • Study of performance, combustion and emission characteristics of direct injection diesel engine fuelled with waste animal fat methyl ester and its conventional diesel and kerosene blends, Karnataka State Council for Science and Technology, IISC, Bangalore, INR. 7000 (Seven thousand rupees), 6 Months, Completed
  • Dharmegowda, I. Y., Muniyappa, L. M., Suresh, A. B., Manjunath Patel GC, and Pradeep, N. B. (2023). Optimization for waste coconut and fish oil derived biodiesel with MgO nanoparticle blend: Grey relational analysis, grey wolf optimization, driving training based optimization and election based optimization algorithm. Fuel, 338, 127249. (SCIEJournal,Impact Factor:8.037, Q1 Journal).https://doi.org/10.1016/j.fuel.2022.127249
  • Suresh AB, Selvan CP, Vinayaka N, Manjunath Patel GC, Lakshmikanthan, A., Rangappa, R., Shinde S, and Malik, VR, (2023), Computational investigations of aluminum based airfoil profiles of helical shaped vertical axis wind turbines suitable for friction stir joining and processing. International Journal on Interactive Design and Manufacturing (IJIDeM), Springer Publications, (Scopus Journal,Q2 Journal).https://doi.org/10.1007/s12008-022-01181-9
  • Ganesh UL, Raghavendra H, Manjunath Patel GC, Avinash Lakshmikanthan, EmanoilLinul, Chander Prakash, Dharam Buddhi, Bharat singh, (2022),Design and Development of Low Density and Refractory Based on Ni-Ti-Al-Li-Si Pentanary Equiatomic High Entropy Alloys: Microstructure and Phase Analysis, International Journal on Interactive Design and Manufacturing (IJIDeM),Springer Publications, (Scopus Journal,Q2 Journal).https://doi.org/10.1007/s12008-022-01070-1
  • Impha YD, LakshmidevammaMM, ParameshwaraS, Ajith B. S, Manjunath Patel GC, Chander Prakash. (2022),MgO Nano-Catalyzed Biodiesel Production from Waste Coconut Oil and Fish Oil Using Response Surface Methodology and Grasshopper Optimization, Sustainability,Vol. 14(18), 11132.MDPI Publications, (SCIEJournal,Impact Factor: 3.889, Q1 Journal).https://doi.org/10.3390/su141811132
  • DAP Prabhakar, AK Shettigar, Mervin A.H, Manjunath Patel GC,Khaled Giasin, Danil Y Pimenov, Prakash Chander,(2022),A Comprehensive Review of Friction Stir Techniques in Structural Materials and Alloys: Challenges and Trends,Journal of Materials Research and Technology, Vol. 20, 3025-3060. Elsevier Publication, (SCIEJournal,Impact Factor:6.267, Q1 Journal).https://doi.org/10.1016/j.jmrt.2022.08.034
  • ShrivathsaTV, ShrikanthaSR, Navin KP, Arun KS, Chakrapani M, Padmanabh K, Manjunath Patel GC, EmanoilLinul, (2022),Development of Convolutional Neural Network Model to Predict Coronary Artery Disease based on Single Lead and Twelve Lead ECG Signals, Applied Sciences, Vol. 12(15), 7711.MDPI Publications, (Q2 Journal,SCIE Journal, Impact Factor: 2.838).https://doi.org/10.3390/app12157711
  • Shivalingaiah K, Nagarajaiah V, Selvan CP, Kariappa ST, Nandini GC, Lakshmikanthan A, Manjunath Patel GC,LinulE, (2022),Stir Casting Process Analysis and Optimization for Production of Al-MWCNT-GR based Hybrid Composites: Taguchi-CRITIC-GRA and Taguchi-CRITIC-MOORA, Metals,Vol. 12(8), pp. 1297.MDPI Publications, (Q2 Journal,SCIE Journal, Impact Factor: 2.695). https://doi.org/10.3390/met12081297
  • M. Mahadevaswamy, Srilatha Rao, Sowmyashree A.S., Vineeta Telma Dsouza, Avinash Lakshminathan, Manjunath Patel G. C., Khaled Giasin, Emanoil L,(2022),Plant-mediated synthesis of NiO (II) from Lantana Camara flowers: A study of photo-catalytic, electrochemical, and biological activities, Journal of Materials Research and Technology, 19, 4543-4556.Elsevier Publication, (SCIEJournal,Impact Factor:6.267, Q1 Journal).https://doi.org/10.1016/j.jmrt.2022.06.166
  • Srikanth H.V., Kanchiraya S., Mahesh B.D., Chithirai P.S., Avinash L., Manjunath Patel G.C., Abdul Razak., Praveena B.A., Emanoil L. (2022), Niger Seed Oil based Biodiesel Production using Transesterification Process: Experimental Investigation and Optimization for higher Biodiesel Yield using Box-Behnken design and Artificial Intelligence Tools, Applied Sciences, 12(12), 5987.MDPI Publication, (Impact Factor: 2.838; SCIEJournal,Q2 Journal).https://doi.org/10.3390/app12125987
  • Praveena B.A., Avinash L., Manjunath Patel GC, ChithiraiPon Selvan, Danil Yu. Pimenov, Khaled Giasin, (2022),Experimental Investigation of Effect of Fiber Length on Mechanical, Wear and Morphological Behavior of Silane Treated Pineapple Leaf Fiber Reinforced Polymer Composites, Fibers, 10(7), 56. MDPI Publication (SCOPUSJournal,Q2 Journal).https://doi.org/10.3390/fib10070056
  • Mahadev Madgule, Sreenivasa C. G., Manjunath Patel G C, Avinash Lakshmikanthan, Piyush Singhal,Dhiren Pandit, Vinayak Malik, (2022), Influence of Foaming Agents on Mechanical and For Peer Review Microstructure Characterization of AA6061 Metal Foams. Proceedings of the IMeche, Part E: Journal of Process Mechanical Engineering, Sage Publications, (Q2 Journal,SCIE Journal, Impact Factor: 1.822). https://doi.org/10.1177%2F09544089221097534
  • RavichandraRangappa, Manujnath Patel G.C., Ganesh R. Chate, Deepak Lokare, Avinash Lakshminathan, Khaled Giasin, Danil Yu Pimenov, (2022), Coaxiality error analysis and optimization of cylindrical parts of CNC turning process, The International Journal of Advanced Manufacturing Technology, Springer Publications,120(9), 6617-6634.https://doi.org/10.1007/s00170-022-09184-2(SCIE Indexed Journal, Impact Factor: 3.563, Q1 Journal).
  • Ganesh R. Chate, Raviraj M. Kulkarni, Manjunath Patel G.C., Avinash Lakshmikanthan, Simran Tophakhane, Nazafali Shaikh, Suman Kongi, PouraviIranavar, (2022), Synthesis and Characterization of Fe2O3 Nanoparticles Reinforced to Recycled Industrial Aluminium Scrap & Waste Aluminium Beverage Cans for Preparing Metal Matrix Nanocomposites, Frattura ed IntegritàStrutturale, Italian Publisher, Vol. 60, 229-242; https://doi.org/10.3221/IGF-ESIS.60.16(Scopus Indexed: Q3 Journal).
  • Jagadish, Manjunath Patel GC, Mumtaz, Zhang Li, Tatjana Sibalija, (2022)Abrasive Water Jet Machining Process Parameters for High Quality Green Composite: The Soft Computing Strategyfor Modelling and Optimization,Journal of Brazilian Society of Mechanical Sciences and Engineering,Springer Publications, Vol. 44, 83.https://doi.org/10.1007/s40430-022-03378-1(SCIE Journal, Impact Factor: 2.361, Q2 Journal).
  • P. Balachander Shetty, J. Sudheer Reddy, Avinash Lakshmikanthan, Patel G.C. Manjunath, Malik Vinayak, Kuldeep Kumar Saxena, (2022)Design and Fabrication of Injection Molds to Manufacture Double Channel Laryngoscope for Effective Airway Management: Taguchi Method for Surface Roughness Optimization, In Key Engineering Materials,Vol. 924, pp. 129-140.Trans Tech Publications, Switzerland, (Scopus Indexed: Q4 Journal).https://doi.org/10.4028/p-crmxz6
  • S.P.S. Yadav; S. Ranganath; A. Lakshmikanthan,Manjunath Patel GC, B.A. Praveena; S. Devaraj; A. Ercetin; V.K. Shankar (2022) Effect of Nickel Coating on Sliding Phenomenon in EN8 Steel Pin and Al6061 alloy disc Pair, Advances in Materials Science and Engineering, Hindwai Publication, Volume 2022, pp. 1-16https://doi.org/10.1155/2022/3274672 (SCIEJournal, Impact Factor:2.098, Q2 Journal).
  • Pradeep NB, M. M. Rajath Hegde, Manjunath Patel GC, Khaled Giasin, Danil Yu. Pimenov, Szymon Wojciechowski, (2022) Synthesis and characterization of Mechanically alloyed NanostructuredTernary Titanium Based Alloy for Bio-Medical Applications, Journal of Materials Research and Technology, 16, 88-101, Elsevier Publication, https://doi.org/10.1016/j.jmrt.2021.11.101 (SCIEJournal,Impact Factor:6.267, Q1 Journal).
  • Manjunath Patel G C, Ganesh R Chate, Vineeth P, Sachin Kumar B, Mohd Amaan Najeeb Bandukwala, Annan Kaisar, Khaled Giasin, DanilYurievichPimenov, Szymon Wojciechowski (2021),Analysis and Optimization of Dimensional Accuracy and Porosity of High Impact Polystyrene Material Printed by FDM Process: PSO, JAYA, Rao, and Bald Eagle Search algorithms, Materials, 14(23), 7479; https://doi.org/10.3390/ma14237479 (Q2 Journal,SCIE Journal, Impact Factor: 3.748). MDPI Publications
  • Ali Ercetin, Fatih A, Ercan Ş, Danil Y.P., Khaled Giasin, Manjunath Patel GC, Avinash L, SzymonW, Image Processing of Mg-Al-Sn alloy Microstructure for Determining Phase Ratios and Grain Size: Comparison of Manual and Computer Vision Method, Materials, 14(17), 5095 (Q2 Journal,SCIE Journal, Impact Factor: 3.748).MDPI Publications.https://doi.org/10.3390/ma14175095
  • Hanumantharaya R, Harsha HM, Manjunath Patel GC, DanilPimenov, Khaled Giasin, Szymon Wojciechowski (2021), Experimental Investigation and Optimization of Compression Molding Parameters for MWCNT/Glass/Kevlar/Epoxy Composites on Mechanical and Tribological Properties, Journal of Materials Research and Technology, 15, 327-341. Elsevier Publications, https://doi.org/10.1016/j.jmrt.2021.08.037(Q1 Journal, SCIE Journal, Impact Factor: 6.267).
  • Rohith S, Mohan N, Avinash L, Manjunath Patel GC, Danil YP, Khaled G. and R.V.S. Prasad, Szymon Wojciechowski (2021), Experimental Investigation of Selective Laser Melting Parameters for Higher Surface Quality and Microhardness Properties: Taguchi and Super Ranking Concept Approaches, Journal of Materials Research and Technology,14, 2586-2600. Elsevier Publications, https://doi.org/10.1016/j.jmrt.2021.07.144 (Q1 Journal, SCIE Journal, IF: 6.267).
  • Praveen Kumar S, Shantharaja M, Manjunath Patel GC, Avinash L, Danil YP, Khaled Giasin, M Krishna(2021), Corrosion behaviour of high-strength Al 7005 alloy and its composites reinforced with industrial waste-based fly ash and glass fibre: Comparison of stir cast and extrusion conditions, Materials, 14(14), 3929. https://doi.org/10.3390/ma14143929 (Q2 Journal, SCIE Journal, IF: 3.748).MDPI Publications
  • Praveen Kumar CM, Manjunath Patel GC, Raviraj MK, Danil YP and Khaled Giasin(2021). Electrodeposition based Synthesis of Zn-Ni bi-composite and Zn-Ni-WC biocompatible tricomposite Nano-Coatings for Surface Engineering Applications, Coatings, 11, 712. https://doi.org/10.3390/coatings11060712. (Q2 Journal, SCIE Journal; IF: 3.236). MDPI Publications
  • Vinayaka N, Avinash L, Manjunath Patel G C, ChithiraiPon Selvan, Vikram Kumar S Jain, Srinivasan SA, Harsha HM (2021) Microstructure, Mechanical and Wear properties of Al 6113 Fly Ash reinforced Composites: Comparision of as-cast and Heat-treated Conditions, Advances in Materials Processing Technologies,Taylor and Francis Publications, Sydney, Australia. (Scopus Indexed Journal, Q2 Journal). https://doi.org/10.1080/2374068X.2021.1927649
  • Praveen Kumar CM, Manjunath Patel GC, Raviraj MK, Danil YP and Khaled Giasin(2021) The Effect of Zn and Zn-WO3 Composites Nano-coatings Deposition on Hardness and Corrosion Resistance in Steel Substrate, Materials, 2021, 14, 2253. https://doi.org/10.3390/ma14092253 (SCIE Journal; IF: 3.748, Q2 Journal). MDPI Publications
  • Manjunath Naik HR, Manjunath LH, Vinayak Malik, Manjunath Patel GC, Kuldeep K Saxena, Avinash Lakshmikanthan (2021) Effect of Microstructure, Mechanical and Wear on Al-CNTs/Graphene Hybrid MMCs, Advances in Materials Processing Technologies,Taylor and Francis Publications, Sydney, Australia. (Scopus Indexed Journal, Q2 Journal). https://doi.org/10.1080/2374068X.2021.1927646
  • Ajith BS, Math MC, Manjunath Patel GC, Mahesh B Parappagoudar(2021) Performance and Emission Characteristics of Diesel Engine Fuelled with Garcinia Gummi-Gutta based Biodiesel-Diesel-Ethanol Blends, SN Applied Sciences,Springer Publications, Vol. 3, Issue 538 https://doi.org/10.1007/s42452-021-04537-0 (Scopus Indexed Journal,Q2 Journal).
  • Manjunath Patel G C, Jagadish (2021) Analysis and optimization of surface quality and thrust forces in drilling high strength Al 7075 alloy: CRITIC and Meta-heuristic Algorithms, Journal of Brazilian Society of Mechanical Sciences and Engineering,Springer Publications, Vol. 43, Issue 5, 1-21. https://doi.org/10.1007/s40430-021-02928-3 (SCIE Journal, Q2 Journal, Impact Factor: 2.361).
  • Manjunath Patel G C, Sandeep Kumar, Jagadish, DanilYurievichPimenov, Khaled Giasin(2021) Experimental analysis and optimization of EDM parameters on HcHcr steel in context with different electrodes & dielectric fluids using Hybrid Taguchi-based PCA-Utility & CRITIC-Utility Approaches, Metals,11(3), 419.MDPI Publications,https://doi.org/10.3390/met11030419 (Q2, Journal, SCIE Journal, Impact Factor: 2.695).
  • Tatjana V. Sibalija, Sandeep Kumar, Manjunath Patel G C, Jagadish (2021) A soft computing-based study on WEDM optimization in processing Inconel 625, Neural Computing & Applications, Springer Publications, https://doi.org/10.1007/s00521-021-05844-8(Q1 Journal, SCIE Journal, Impact Factor: 5.102).
  • Avinash Lakshmikanthan, Vinyas Mahesh, Ram Prabhu T, Manjunath Patel GC and Srikanth Bontha(2021) Free vibration analysis of A357 alloy reinforced with dual particle size silicon carbide metal matrix composite plates using finite element method. Archives of Foundry Engineering, De-Gryuter Publisher, Germany, Vol. 21, Issue 1, 101-112. DOI: 10.24425/afe.2021.136085 (Q2 Journal, Scopus Indexed Journal).https://journals.pan.pl/dlibra/publication/136085/edition/118998/content
  • Girisha L, Malteshkumar D, Shivananda DC, Ajey CP, Manjunath Patel GC (2021)Online Teaching and Learning of Higher Education in India during COVID-19 Emergency Lockdown, Pedagogical Research,6(1), em0090, Modestum Publisher, UK, https://doi.org/10.29333/pr/9665
  • Ganesh R. Chate, Manjunath Patel G C, Shubham U. Urankar, Salim A. Sanadi, Akshay P. Jadhav, Shubham Hiremath, Anand S. Deshpande (2021) Sustainable Machining: Modelling and Optimization using Taguchi, MOORA and DEAR methods, Materials Today: Proceedings, 46, 8941-8947.https://doi.org/10.1016/j.matpr.2021.05.365. Elsevier Publications.(Scopus Indexed Journal).
  • Raviraj K Sunkapur, Manjunath Patel G C, Sharanaprabhu C M (2021) Study of geometric parameters and TiC reinforcements in aluminum metal matrix composite on fracture toughness using Taguchi method, Materials Today: Proceedings, 46, 8900-8904.https://doi.org/10.1016/j.matpr.2021.05.358. Elsevier Publications.(Scopus Indexed Journal).
  • Subbramanya, AK Shettigar, Manjunath Patel GC, MA Herbert, Shrikanth Rao (2020) Influence of process variables on joint attributes of friction stir welded Aluminum matrix composite, Advances in Materials and Processing Technologies (AMPT),Taylor and Francis, Publishers, UK, Vol. 5, Issue 2, 329-337. (Scopus Indexed: Q2 Journal). https://doi.org/10.1080/2374068X.2020.1860588
  • Amol Nayakappa Patil, Shivkumar K M, Manjunath Patel G C,Somashekhar P Jatti, Saish N. Rivankar, (2020). Fuzzy TOPSIS and Grey Relation Analysis Integration for Supplier Selection in Fiber Industry, International Journal of Supply and Operations Management,Kharazmi University, Korean Publisher, Volume 7, Issue 4, pp. 373-383. http://www.ijsom.com/article_2828.html (Scopus Indexed: Q3 Journal).
  • Ajith BS, Math MC, Manjunath Patel GC, Mahesh B Parappagoudar(2020) Analysis and optimisation of transesterification parameters for high-yield Garcinia Gummi-Gutta biodiesel using RSM and TLBO, Australian Journal of Mechanical Engineering, Taylor and Francis Publisher,https://doi.org/10.1080/14484846.2020.1815998, (Scopus Indexed: Q3 Journal)
  • Manjunath Patel G C, Pradeepa NB, Girisha L, Harsha HM, ArunkumarShettigar, (2020). Experimental analysis and optimization of plasma spray parameters on microhardness and wear loss of Mo-Ni-Cr coated super duplex stainless steel, Australian Journal of Mechanical Engineering, Taylor and Francis Publisher, https://doi.org/10.1080/14484846.2020.1808760, (Scopus Indexed: Q3 Journal).
  • Ajith BS, Math MC, Manjunath Patel GC (2020). Evaluation of performance and emission characteristics of diesel engine fuelled with garcinia gummi gutta biodiesel-diesel-diethyl ether blends, European Journal of Sustainable Development Research, Modestum Publisher, UK, 4(4), em0134. https://doi.org/10.29333/ejosdr/8353
  • HanumantharayaRangaswamy, IrappaSogalad, S. Basavarajappa, Santhosh Acharya, Manjunath Patel GC (2020) Experimental analysis and prediction of strength of adhesive bonded single lap composite joints: Taguchi and Artificial neural network approaches, SN Applied Sciences,Springer Publications, 2, 1055.https://doi.org/10.1007/s42452-020-2851-8(Scopus Indexed Journal, Q2 Journal).
  • Arun Kumar Shettigar, Manjunath Patel G C, Ganesh R. Chate, PR Vundavilli, Mahesh B Parappagoudar(2020) Artificial bee colony, genetic, back propagation and recurrent neural networks for developing intelligent system of turning process, SN Applied Sciences,Springer Publications, 2(4), pp. 1-21. https://doi.org/10.1007/s42452-020-2475-z. (Scopus Indexed Journal, Q2 Journal).
  • Ajith BS, Math MC, Manjappa S, Manjunath Patel G C (2020), Performance and Emission Characteristics of Biodiesel Production from Fish Oil after Extracting Omega 3 Fatty Acid, Journal of Physics: Conference Series,IOP Publishing, Vol. 1473, 012041, DOI:10.1088/1742-6596/1473/1/012041. (Scopus Indexed Journal). https://doi.org/10.1088/1742-6596/1473/1/012041
  • Manjunath Patel G.C, Deepak Lokare, Ganesh R. Chate, Mahesh B. Parappagoudar, Nikhil R, Kapil Gupta (2020), Analysis and optimization of surface quality while machining high strength aluminium alloy for aerospace applications, Measurement, 152, 107337. Elsevier Publications, UK, https://doi.org/10.1016/j.measurement.2019.107337 (Q1 Journal, SCIE Journal, IF: 5.131)
  • Manjunath Patel G C, Kapil Gupta, Ganesh R Chate, Mahesh B Parappagoudar, Sandeep MJ, Daivagna UM (2019), Performance Analysis of Cow Dung as an Eco-Friendly Binder and Additive Material for Sustainable Moulding and Casting, China Foundry, Springer Publications, 16(6), pp. 405-411 (Q2 Journal,SCIE Journal, IF: 1.045). https://doi.org/10.1007/s41230-019-9078-6
  • Hanumanthaya, IrappaSogalad, Basavarajappa S, Manjunath Patel G C. Modelling and optimization of adhesive bonded joint strength of composites for aerospace applications, International Journal of Computational Materials Science and Surface Engineering,Inderscience Publisher, UK, Vol. 8, Issue 3-4, pp. 167-184 (Q3 Journal, Scopus Index). https://doi.org/10.1504/IJCMSSE.2019.104694
  • Vinay DC, Amba Shetty, Manjunath Patel GC, (2019) Estimation of monsoon seasonal precipitation teleconnection with ENSO sea surface temperature Indices over the Western Ghats of Karnataka”, Asia-Pacific Journal of Atmospheric Sciences, Springer Publications, https://doi.org/10.1007/s13143-019-00133-w(Q2 Journal, SCIE Journal,IF:6.623).
  • Sandeep MJ, Manjunath Patel G C, Ganesh R Chate, Daivagna UM, MB Parappagoudar, (2019). Multi response optimization of green sand moulding parameters using Taguchi-DEAR method,Applied Mechanics and Materials,Trans Tech Publications, Switzerland,Vol. 895, pp. 1-7. (Web of Science Indexed Journal) https://doi.org/10.4028/www.scientific.net/AMM.895.1
  • Hanumanthaya, IrappaSogalad, Basavarajappa S, Manjunath Patel G C. (2019). A comprehensive modelling, analysis and optimization of adhesive bonded single lap glass fiber reinforced composite joints, International Journal of Materials Engineering Innovation, Inderscience Publisher UK, Vol. 10, Issue 4, pp. 286-309. https://doi.org/10.1504/IJMATEI.2019.103609(Q3 Journal, Scopus Index)
  • Ganesh R Chate, Manjunath Patel GC, Anand S Deshpande and Mahesh B Parappagoudar, (2019). Comprehensive modelling, analysis and optimization of furan resin-based moulding sand system with sawdust as an additive, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Springer Publications, 41 (4), 183https://doi.org/10.1007/s40430-019-1684-0 (Q2 Journal, SCIE Journal, IF: 2.22).
  • Vidit Mathur,Subramanya R. Prabhu, Manjunath Patel G.C, Arun Kumar Shettigar, (2019) Reinforcement of titanium dioxide nano-particles in Aluminium Alloy AA 5052 through friction stir process,Advances in Materials and Processing Technologies,Taylor and Francis, Publishers, UK, Vol. 5, Issue 2, 329-337 (Q3 Journal, Scopus Indexed). https://doi.org/10.1080/2374068X.2019.1585072
  • Manjunath Patel G C, Arun Kumar Shettigar and Mahesh B. Parappagoudar, (2018). A systematic approach to model and optimize wear behaviour of castings produced by squeeze casting process, Journal of Manufacturing Processes,Elsevier Publications, Vol. 32, pp. 199–212. https://doi.org/10.1016/j.jmapro.2018.02.004(Q1 Journal, SCIE Journal, IF: 5.01)
  • Ganesh R. Chate, Manjunath Patel GC, Raviraj M. Kulkarni, Pavan Vernekar, Anand S. Deshpande and M.B. Parappagoudar, (2018). Study of the effect of nano-silica particles on resin-bonded moulding sand properties and quality of casting, Silicon, Springer Publications, Vol. 10(5), pp. 1921-1936. (Q2 Journal,SCIE Journal, Impact Factor: 2.67). https://doi.org/10.1007/s12633-017-9705-z
  • Ganesh R Chate, Manjunath Patel GC, Anand S Deshpande and Mahesh B Parappagoudar. (2018). Modeling and optimization of furan molding sand system using design of experiments and particle swarm optimization. Proceedings of the IMeche, Part E: Journal of Process Mechanical Engineering, Sage Publications, Vol. 232, Issue 5, pp. 579-598 (Q2 Journal,SCIE Journal, Impact Factor: 1.62). https://doi.org/10.1177/0954408917728636
  • Manjunath Patel GC, Arun Kumar Shettigar, Prasad Krishna and Mahesh B. Parappagoudar, (2017). Back propagation genetic and recurrent neural network applications in modelling and analysis of squeeze casting process, Applied Soft Computing,Elsevier PublicationsVol. 59, pp. 418-437 (Q1 Journal,SCIE Journal, Impact Factor: 6.725). https://doi.org/10.1016/j.asoc.2017.06.018
  • Ganesh R Chate, Manjunath Patel GC, Anand S Deshpande and M B Parappagoudar, (2017). Modeling and optimization of phenol formaldehyde resin sand mould system, Archives of Foundry Engineering, DE GRUYTER Publishers Germany, Vol. 17, Issue 2, pp. 162-170. DOI:10.1515/afe-2017-0069 (Q2 Journal, Scopus Indexed Journal).https://journals.pan.pl/publication/117350/edition/102026/archives-of-foundry-engineering-2017-vol-17-no-2-modeling-and-optimization-of-phenol-formaldehyde-resin-sand-mould-system-parappagoudar-m-b-patel-m-g-c-chate-g-r-deshpande-a-s
  • Manjunath Patel G C, Prasad Krishna, Pandu R. Vundavilli and Mahesh B. Parappagoudar (2016), Multi-objective optimization of squeeze casting process using genetic algorithm and particle swarm optimization, Archives of Foundry Engineering, DE GRUYTER Publishers Germany, Vol. 16, Issue 3, pp. 172-186 (Q2 Journal,Scopus Indexed Journal).  https://doi.org/10.1515/afe-2016-0073
  • Manjunath Patel G C, Prasad Krishna and Mahesh B. Parappagoudar (2016), Squeeze casting process modeling by a conventional statistical regression analysis approach, Applied Mathematical Modelling, Elsevier Publications, Vol. 40, Issue 15, pp. 6869-6888 (Q1 Journal,SCIE Journal: Impact Factor: 5.129). https://doi.org/10.1016/j.apm.2016.02.029
  • Manjunath Patel G C, Prasad Krishna and Mahesh B. Parappagoudar (2016), An intelligent system for squeeze casting process - Soft computing-based approach, International Journal of Advanced Manufacturing Technology, Springer Publications, Vol. 86, Issue9-12, pp. 3051-3065. (Q1 Journal,SCIE Journal, Impact Factor: 3.563). https://doi.org/10.1007/s00170-016-8416-8
  • Manjunath Patel G C, Prasad Krishna, Mahesh B. Parappagoudar and Pandu R. Vundavilli (2016), Multi-objective optimization of squeeze casting process using evolutionary algorithms, International Journal of Swarm Intelligence Research,IGI Publications, USA,Vol. 7, Issue 1, pp. 57-76.DOI:10.4018/IJSIR.2016010103 (Q4 Journal, Scopus Indexed Journal). https://journals.pan.pl/dlibra/publication/117237/edition/101917/content/archives-of-foundry-engineering-2016-multi-objective-optimization-of-squeeze-casting-process-using-genetic-algorithm-and-particle-swarm-optimization-patel-g-c-m-krishna-p-vundavilli-p-r-parappagoudar-m-b-no-3?language=en
  • JK Kittur, Manjunath Patel GC and Mahesh B. Parappagoudar (2016), Modelling of pressure die casting process: An artificial Intelligence approach, International Journal of Metalcasting,American Foundry Society/Springer, Vol. 10, Issue. 1, pp. 70-87, (Q1 Journal,SCIE Journal, Impact Factor: 1.805). https://doi.org/10.1007/s40962-015-0001-7
  • Manjunath Patel G C, Prasad Krishna and Mahesh B. Parappagoudar (2015), Modelling of squeeze casting process using Design of Experiments and Response Surface Methodology, International Journal of Cast Metals Research,Taylor and Francis/Maney Publications UK, Vol. 28, Issue 3, 167-180.(Q2 Journal,SCIE Journal, Impact Factor: 1.192). https://doi.org/10.1179/1743133614Y.0000000144
  • Manjunath Patel G C, Prasad Krishna and Mahesh B. Parappagoudar (2016), Modelling and multi-objective optimization of squeeze casting process using regression analysis and genetic algorithm, Australian Journal of Mechanical Engineering,Engineers Media Publication/ Taylor and Francis Publications, Sydney, Australia, Vol. 14, Issue 3, 182-198. (Q3 Journal, Scopus Indexed). https://doi.org/10.1080/14484846.2015.1093231
  • Manjunath Patel G C, Prasad Krishna and Mahesh B. Parappagoudar (2015),Prediction of secondary dendrite arm spacing in squeeze casting using fuzzy logic based approaches, Archives of Foundry Engineering,DE GRUYTER Publishers Germany,Vol.15, Issue 3, pp. 51-68. DOI:10.1515/afe-2015-0011(Q2 Journal, Scopus Indexed Journal). https://journals.pan.pl/publication/102393/edition/88411/archives-of-foundry-engineering-2015-no-1-prediction-of-secondary-dendrite-arm-spacing-in-squeeze-casting-using-fuzzy-logic-based-approaches-patel-m-g-c-krishna-p-parappagoudar-m-b
  • Manjunath Patel G C, Prasad Krishna and Mahesh B. Parappagoudar (2015), Modelling of squeeze casting process: Present state and future perspectives, Advances in Automobile Engineering,OMICS Publishing, Vol. 4, Issue 1, http://dx.doi.org/10.4172/2167-7670.1000111
  • Manjunath Patel G C, Prasad Krishna and Mahesh B. Parappagoudar (2014), Forward and reverse process models for the squeeze casting process using neural network based approaches, Applied Computational Intelligence and Soft Computing,Hindwai Publication,Vol. 2014,Article ID 293976, 12 pages, http://dx.doi.org/10.1155/2014/293976, (Q3 Journal, Scopus Indexed).
  • Manjunath Patel G C, Robins Mathew, Prasad Krishna and Mahesh B. Parappagoudar (2014), Investigation of squeeze cast process parameters effects on secondary dendrite arm spacing using statistical regression and artificial neural network models, Procedia Technology,Elsevier Publications,Vol.14, pp. 149-156, (Scopus Indexed). https://doi.org/10.1016/j.protcy.2014.08.020
  • Manjunath Patel G C, Prasad Krishna and Mahesh B. Parappagoudar (2014), Optimization of squeeze cast process parameters using taguchi and grey relational analysis, Procedia Technology, Elsevier Publications, Vol. 14, pp. 157-164, (Scopus Indexed). https://doi.org/10.1016/j.protcy.2014.08.021
  • Manjunath Patel G C, Prasad Krishna and Mahesh B. Parappagoudar (2014),Prediction of squeeze cast density using fuzzy logic based approaches, Journal for Manufacturing Science and Production,DE GRUYTER Publishers Germany, Vol. 14, Issue 2, pp. 125-140. https://doi.org/10.1515/jmsp-2014-0011
  • Manjunath Patel G C and Prasad Krishna (2013),A review on application of artificial neural networks for injection moulding and casting processes, International Journal of Advances in Engineering Sciences,RG Society Publications India, Vol. 3, Issue. 1, pp. 1-12. (Google Scholar Journal). http://rgjournals.com/index.php/ijse/article/view/359
  • Manjunath Patel G C and Prasad Krishna (2012), Prediction and optimization of dimensional shrinkage variations in injection moulded parts using forward and reverse mapping of artificial neural networks, Advanced Materials Research,Trans Tech Publications, Switzerland, Vols. 463-464, pp. 674-678, (Web of Science Journal). https://doi.org/10.4028/www.scientific.net/AMR.463-464.674
  • Abhishek SR, Gowtham V, Dinesh Kumar Bishnoi, Swathi P, Manjunath Patel G C (2019) Hybrid Solar - Electric Drier, International Journal of Engineering Research & Technology (IJERT), Vol. 7, Issue 7, 1-4, ISSN: 2278-0181. https://www.ijert.org/hybrid-solar-electric-drier
  • Rakshan C. Naik, Sagar Kottary, Sagar Subashchandrahadagali, Preethesh K, Nithesha, Ganesh R. Chate, Manjunath Patel G. C (2017), Design and development of magnetic chip collector machine, International Journal of Engineering Research in Mechanical and Civil Engineering (IJERMCE), Vol. 2, Issue 5, pp. 855-857, ISSN (Online) 2456-1290. DOI: http://ijermce.com/abstract.php?id=10562
  • Anirudh Mallya U, Ashwith I Mendonca, Allan Loy D’souza, Jonathan Rodrigues, Manjunath Patel G.C., Prasanna Kumar (2018). Semi-automated puffed rice machine using agricultural waste burnt low smoke stove, International Journal of Science, Engineering and Management (IJSEM), 3(5),90-93, ISSN (Online) 2456 -1304. DOI:01.1617/vol5/iss5/pid29073https://www.technoarete.org/common_abstract/pdf/IJSEM/v5/i5/Ext_29073.pdf
  • Syed Jahangir Badashah, Gyanshankar Praphullakumar Mishra, Komma, Basha Vijaya Nirmala, Mahaboob A. M.; M.Rajaiah, I.Meena, Neeraja B, J. Manikandan, Varadaraj K.R.,Vijay Kumar S., G. C. ManjunathPatel, and Avinash Lakshmikanthan, An IOT Based Pollution Management System to Monitor the Pollutants Released into Air or Water Bodies from Industries, Patent number: 2021103904, Australian Government, Innovation Patent. Granted: 30 March 2022.
  • Manjunath Patel G C, Ganesh R Chate, Mahesh B. Parappagoudar, Kapil Gupta, Machining of Hard Materials - A Comprehensive Approach to Experimentation, Modeling and Optimization, In Manufacturing and Surface Engineering, Springer Briefs in Applied Sciences and Technology, Springer Book, pp. 1-129. ISBN 978-3-030-40101-6. https://www.springer.com/gp/book/9783030401016. DOI: 10.1007/978-3-030-40102-3 (Scopus Index, Q4)
  • Veeresh Nayak C, Manjunath Patel G.C, M R Ramesh, Vijay Desai, Sudip Kumar Samanta, (2020). Analysis and optimization of metal injection moulding process, In Materials, Forming, Machining and Post Processing,Springer Int. Publishing, Cham-Switzerland, pp. 41-74. https://doi.org/10.1007/978-3-030-18854-2_2(Scopus Index: Q4 Rated)
  • Manjunath Patel G C, Ganesh R Chate, and Mahesh B. Parappagoudar (2020). Modelling and optimization of alphaset resin bonded sand moulding system using statistical design of experiments and evolutionary algorithms. “Optimization of Manufacturing Processes”,Springer Int. Publications, Netherland, pp. 1-28. https://doi.org/10.1007/978-3-030-19638-7_1 (Scopus Indexed: Q4 Rated)
  • Manjunath Patel G C, Jagadish, Rajanna Suresh Kumar and NVS Naidu (2020). Optimization of Abrasive water jet machining for green composites using multi-variant hybrid techniques. “Optimization of Manufacturing Processes”,Springer Int. Publications, Netherland, pp. 129-162,https://doi.org/10.1007/978-3-030-19638-7_6(Scopus Indexed: Q4 Rated)
  • Manjunath P.G.C., Krishna, P., Parappagoudar, M. B., Vundavilli, P. R., and Bhushan, S. B. (2018).Squeeze Casting Parameter Optimization Using Swarm Intelligence and Evolutionary Algorithms. In Critical Developments and Applications of Swarm Intelligence (pp. 245-270). IGI Global, USA. DOI: 10.4018/978-1-5225-5134-8.ch01 (Scopus Indexed)https://www.igi-global.com/chapter/squeeze-casting-parameter-optimization-using-swarm-intelligence-and-evolutionary-algorithms/198929
  • Ganesh R Chate, Manjunath Patel GC, Anand S Deshpande and Mahesh B Parappagoudar, (2018). Application of Statistical Modelling and Evolutionary Optimization Tools in Resin-Bonded Molding Sand System, “Handbook on emerging Investigation in Artificial Life Research and Development”, (pp. 125-132), IGI Global USA. DOI:10.4018/978-1-5225-5396-0.ch007, https://www.igi-global.com/chapter/application-of-statistical-modelling-and-evolutionary-optimization-tools-in-resin-bonded-molding-sand-system/207202
  • Jagadish and Manjunath Patel G C(2021)Modeling and optimization of AWJM process on processing of Banana Fiber reinforced polymer composites using Taguchi-JAYA method, In Edited by T. Sibalija and J.P. Davim, Soft Computing in Smart Manufacturing: Solutions toward Industry 5.0, Berlin, Boston: De Gruyter, 2021, pp. 253-270. https://doi.org/10.1515/9783110693225-008
  • Ganesh R Chate, KulkarniRM, Nikhil R, Chate VR, Manjunath Patel G C,Sollapur S, Shettar, M. (2023). Ceramic material coatings: emerging future applications. In Advanced Ceramic Coatings for Emerging Applications (pp. 3-17). Elsevier.https://doi.org/10.1016/B978-0-323-99624-2.00007-3
  • Prasad Chandran N, Manoj D. Naik, Manjunath Patel GC, Avinash Lakshmikanthan, Ganesh R. Chate. Investigation of Green Compression Strength and Green Shear Strength in Green Sand mould using Ant Hill Slit as apartial replacement of foundry sand using Response surface Methodology, 1st International Symposium on Characterization (ISC´21), Turkey, October 08-09, 2021.
  • Anirudh Mallya U, Ashwith I Mendonca, Allan Loy D’souza, Jonathan Rodrigues, Manjunath Patel G.C., Prasanna Kumar (2018) Semi-automated puffed rice machine using agricultural waste burnt low smoke stove, International Conference on Applied Science, Engineering and Technology (ICASET-2018), Sri Sairam College of Engineering, Anekal, Bengaluru, India, 17th -18th May 2018.
  • Manjunath Patel G C, Ajith B.S.,Anirudh Mallya U., Jonathan A. Rodrigues, Allan Loy D’Souza, Ashwith I. Mendonca (2018) Teaching learning based optimization of squeeze casting process for quality castings, In IOP Conference Series: Materials Science and Engineering (Vol. 376, No. 1, p. 012112). IOP Publishing. Ltd. United Kingdom (Scopus Indexed Conference). https://doi.org/10.1088/1757-899X/376/1/012112
  • Rakshan C Naik, Sagar Kottary, Sagar Subashchandrahadagali, Preethesh K, Nithesha, and Manjunath Patel G. C (2017) Design and development of magnetic chip collector machine,International Conference on Emerging Technological Innovations in Mechanical Engineering (ICETIME 2017),RR Institute of Technology,Bangalore, India. 26th -27th May 2017.
  • Anirudh Mallya U., Jonathan A. Rodrigues, Allan Loy D’Souza, Ashwith I. Mendonca, Manjunath Patel G. C., Kiran Kumar C.V. (2017) Purification of waste water for drinking application, Proceedings of International conference of manufacturing and technology simulation(ICMTS 2017),IIT Madras, Chennai, India. 7th-8th July 2017, pp. 254-258.
  • Manjunath Patel G C, Prasad Krishna and Mahesh B. Parappagoudar, (2014) Optimization of squeeze cast process parameters on hardness of LM20 alloy using Taguchi method,3rd World Conference on Applied Sciences Engineering & Technology (WCASET-2014), September, 27-29, 2014, Kathmandu, Nepal, pp. 340-343, ISBN 13: 978-81-930222-0-7 (Received Best Paper Award).
  • Manjunath Patel G C, Robins Mathew, Prasad Krishna and Mahesh B. Parappagoudar, (2014) Investigation of squeeze cast process parameters effects on secondary dendrite arm spacing using statistical regression and artificial neural network models, 2nd International Conference on Innovation in Automation and Mechatronics Engineering (ICIAME-2014), GCET, Gujarat,India, March 7-8, 2014, pp. 62.
  • Manjunath Patel G C, Prasad Krishna and Mahesh B. Parappagoudar (2014) Optimization of squeeze cast process parameters using taguchi and grey relational analysis, 2nd International Conference on Innovation in Automation and Mechatronics Engineering (ICIAME-2014), GCET, Gujarat,India, March 7-8, 2014, pp. 63.
  • Manjunath Patel G C, Robins Mathew and Prasad Krishna (2013)Effects of squeeze casting process parameter on hardness of LM20 alloy, Proc. of International conference on Engineering materials and processes (ICEMAP-2013),TEC, Chennai, India, May 23-24, 2013, pp-188-191.
  • Manjunath Patel G C, Robins Mathew and Prasad Krishna (2013) Investigation of Squeeze Casting Process Parameters on Density of LM20 alloy, Advances in Engineering and Technology (AET-2013),National Capital Region India, December 13-14, 2013, pp. 776-785.
  • Manjunath Patel G C and Prasad Krishna (2013) Investigation of Squeeze casting process parameters on surface quality of Aluminium alloy, Minamata International Symposium on Environmental and Energy Technology (MISSION-2013), Kumamoto university, Japan, December 4-6, 2013, pp. ME 4-7.
  • Manjunath Patel G C and Prasad Krishna (2012) Sensitivity analysis using trained BP ANN & Fuzzy optimum design for validation of ANN model for the plastic injection molding process, All India Manufacturing Technology Design and Research (AIMTDR-2012), Jadavpur University, Kolkatta,India, December 14-16, 2012, pp. 70.
  • Manjunath Patel G C and Prasad Krishna (2011) Prediction of process parameters of evaporative pattern casting processes using neural network models under forward and reverse mapping, Proceedings of International Conference on Advanced Materials & Processing (ICAMP-2011), RMK Engineering college, Chennai,India, December 19-20, 2011, pp 343-348.
  • J.K.Kittur, Manjunath Patel G.C, M.N. Choudhari, T.V. Herwadkar, M.B. Parappagoudar (2011) Neural network model to predict the process parameters and responses using forward and reverse mappings for die casting process, International Conference on Advances in Materials and Materials Processing (ICAMMP-2011), IIT-Kharaghpur, India, December 9-11, 2011.
  • J.K.Kittur, Manjunath Patel G.C, M.N. Choudhari, T.V. Herwadkar, M.B. Parappagoudar (2011) Neural network model to predict drilling parameters on surface roughness,Proc. of 5th International Conference on Advances in Mechanical Engineering (ICAME-2011), SVNIT Surat, Gujarat, India,June 06-08, 2011, pp. 1238-1242
  • Manjunath Patel GC, Praveena R, Amruth M, MujeeburRahaman, Abhishek C R, Basavarajappa Y H (2019), Brainstorming and Fishbone diagram Tools for Enhancing the Student Placement in Technical Education System, National Conference on “Higher Education in INDIA: Challenges and opportunities”, PESITM, Shivamogga, India, November 15, 2019.
  • Manjunath Patel G C and Prasad Krishna, (2012) Applications of Artificial Neural Networks in Metal Casting Processes – A Review, Proc. of 7th National conference on Optimization Techniques in Engineering Sciences and Technologies (OPTEST-2012), BITS, Tamilnadu, India, April 20-21, 2012, pp 10
  • IAENG
  • Metal Casting and Welding
  • Non-Traditional Machining
  • Machine Tools and Operation
  • Total Quality Management
  • Manufacturing Processes – III