Faculty Details

Mr. Kiran Kumar K

Assistant Professor

Email :kirankumar041@pestrust.edu.in

Educational Qualification :
B.E in Mechanical Engineering, M.Tech in Thermal Power Engineering.
Academic Experience :
7 Years

Mr. Kiran Kumar K

Assistant Professor

Email :kirankumar041@pestrust.edu.in

Educational Qualification :
B.E in Mechanical Engineering, M.Tech in Thermal Power Engineering.
Academic Experience :
7 Years

  • Heat Transfer
  • Fluid Mechanics
  • Published a paper entitled “Exergy Transfer and Irreversibility of Metal Foams Filled in a Vertical Channel” in ASME Journal of Thermal Science and Engineering Applications. Vol. 15, Issue 8, 081005-1-15, May 19, 2023. https://doi.org/10.1115/1.4062399. SCI Journal, Impact Factor: 1.879.
  • Published a paper entitled “Performance Evaluation Based on Exergy Analysis Through Partially Filled Metal Foams in Forced Convection” inASME Journal of Heat and Mass Transfer, Vol. 145, Issue 8, 082701-1-15. April 11, 2023. https://doi.org/10.1115/1.4062214. SCI Journal, Impact Factor: 1.855.
  • Published a paper entitled “Flow and heat transfer irreversibility in partial filled metal foams” inInternational Journal of Thermal Sciences, 184 February 2023, 107968. https://doi.org/10.1016/j.ijthermalsci.2022.107968. SCI Journal, Impact Factor: 4.779.
  • Published a paper entitled “Effect of Spatial Porosity of Metal Foams on Heat Transfer Filled in a Vertical Channel” in Materials today Proceedings, Vol 51, part 3, 2022, pp. 1539-1547. Available online: 12th November, 2021.https://doi.org/10.1016/j.matpr.2021.10.359
  • Published a paper titled as “Power Generation by using Exhaust Gas Heat from an Internal Combustion Engine” in International Journal of Engineering Research & Technology (IJERT) ISSN: 2278-0181. Published by,www.ijert.org NCMPC - 2019 Conference Proceedings, Volume 7, Issue 07, dated 06/06/2019. DOI: 10.17577/IJERTCONV7IS07024
  • Published a paper titled as “Power Generation by using Kinetic Energy of Exhaust Gases from an Internal Combustion Engine” in International Journal of Engineering Research & Technology (IJERT) ISSN: 2278-0181. Published by,www.ijert.org NCMPC - 2019 Conference Proceedings, Volume 7, Issue 07, dated 06/06/2019. DOI: 10.17577/IJERTCONV7IS07025
  • Published a paper titled as “Design of Hydraulic Ladle Tilting Device at Pig Casting Machine” in Journal of Emerging Technologies and Innovative Research (JETIR), Vol. 5, Issue 7, July 2018, https://www.jetir.org/papers/JETIRC006250.pdf (ISSN-2349-5162). UGC Approved (Journal number: 63975), Impact Factor: 7.95
  • Published a paper titled as “Numerical Analysis of Shell and Tube Heat Exchanger Performance with Different Baffle Cut Percentage along with Different Orientations” in International Journal of Engineering Technology Science and Research (IJETSR), Volume 4, Issue 12, December 2017, ISSN 2394-3386.
  • Published a paper titled “Numerical Analysis of Shell and Tube Heat Exchanger Performance with Different Baffle Space and Baffle Cut Orientations using CFD” in International Journal of Engineering Technology Science and Research (IJETSR), Volume 4, Issue 7, July 2017, ISSN 2394-3386.
  • Published a paper entitled “Exergy Transfer and Irreversibility of Metal Foams Filled in a Vertical Channel” inASME Journal of Thermal Science and Engineering Applications. Vol. 15, Issue 8, 081005-1-15, May 19, 2023. https://doi.org/10.1115/1.4062399. SCI Journal, Impact Factor: 1.879.
  • Published a paper entitled “Performance Evaluation Based on Exergy Analysis Through Partially Filled Metal Foams in Forced Convection” inASME Journal of Heat and Mass Transfer, Vol. 145, Issue 8, 082701-1-15. April 11, 2023. https://doi.org/10.1115/1.4062214. SCI Journal, Impact Factor: 1.855.
  • Published a paper entitled “Flow and heat transfer irreversibility in partial filled metal foams” inInternational Journal of Thermal Sciences, 184 February 2023, 107968. https://doi.org/10.1016/j.ijthermalsci.2022.107968. SCI Journal, Impact Factor: 4.779.
  • Published a paper entitled “Effect of Spatial Porosity of Metal Foams on Heat Transfer Filled in a Vertical Channel” in Materials today Proceedings, Vol 51, part 3, 2022, pp. 1539-1547. Available online: 12th November, 2021.https://doi.org/10.1016/j.matpr.2021.10.359
  • Published a paper titled as “Power Generation by using Exhaust Gas Heat from an Internal Combustion Engine” in International Journal of Engineering Research & Technology (IJERT) ISSN: 2278-0181. Published by,www.ijert.org NCMPC - 2019 Conference Proceedings, Volume 7, Issue 07, dated 06/06/2019. DOI: 10.17577/IJERTCONV7IS07024
  • Published a paper titled as “Power Generation by using Kinetic Energy of Exhaust Gases from an Internal Combustion Engine” in International Journal of Engineering Research & Technology (IJERT) ISSN: 2278-0181. Published by,www.ijert.org NCMPC - 2019 Conference Proceedings, Volume 7, Issue 07, dated 06/06/2019. DOI: 10.17577/IJERTCONV7IS07025
  • Published a paper titled as “Design of Hydraulic Ladle Tilting Device at Pig Casting Machine” in Journal of Emerging Technologies and Innovative Research (JETIR), Vol. 5, Issue 7, July 2018, https://www.jetir.org/papers/JETIRC006250.pdf (ISSN-2349-5162). UGC Approved (Journal number: 63975), Impact Factor: 7.95
  • Published a paper titled as “Numerical Analysis of Shell and Tube Heat Exchanger Performance with Different Baffle Cut Percentage along with Different Orientations” in International Journal of Engineering Technology Science and Research (IJETSR), Volume 4, Issue 12, December 2017, ISSN 2394-3386.
  • Published a paper titled “Numerical Analysis of Shell and Tube Heat Exchanger Performance with Different Baffle Space and Baffle Cut Orientations using CFD” in International Journal of Engineering Technology Science and Research (IJETSR), Volume 4, Issue 7, July 2017, ISSN 2394-3386.
  • Presented a paper entitled “Determination of Exergy Limits for Different Metal Foam Configurations” at the International Conference on Recent Advances in Modeling and Analysis of Thermal and Energy Systems (RAMATES-2023) From 10-12 May 2023, Organized by the Department of Mechanical Engineering, National Institute of Technology Karnataka, Surathkal, India.
  • Presented a paper entitled “Impact of Partial Filling of Metal Foams on Entropy Generation in a Vertical Channel” in the 48th National Conference on Fluid Mechanics and Fluid Power (FMFP-2021) held during 27th – 29th December at BITS Pilani, Pilani Campus, Rajasthan, India.
  • Presented a paper entitled “Effect of Partial Filling of Metal Foams on Exergy Transfer in a Vertical Channel” towards the International Conference held on 24th – 25th September 2021, organized by the Department of Mechanical Engineering at the Institute of Technical Education & Research, Siksha 'O' Anusandhan (Deemed to be University), Bhubaneswar, Odisha, India. Received Best Paper Presentation Award.
  • Presented a paper titled as “Effect of Spatial Porosity of Metal Foams on Heat Transfer Filled in a Vertical Channel” in 2nd International Conference on Sustainable Energy Solutions for a Better Tomorrow (SESBT2021), organized by VIT Chennai in collaboration with Groningen University, Netherlands during July 23-24, 2021.
  • Presented a paper titled “Design of Hydraulic Ladle Tilting Device at Pig Casting Machine” in 4th International Conference on Advancement in Engineering, Applied Science and Management (ICAEASM 2018) at Indian Council of Social Science Research, North West Regional Center, Punjab University Campus, Chandigarh, India on 1st July 2018.
  • Presented a paper titled as “Numerical Analysis of Shell and Tube Heat Exchanger Performance with Different Baffle Cut Percentage along with Different Orientations” in International Conference on Latest Concepts in Science, Technology, Management and Humanities (ICLCSTMH) at GIIT, Gwalior, M.P., India on 17th December 2017.
  • Presented a paper titled as “Power Generation by using Exhaust Gas Heat from an Internal Combustion Engine” in National Conference on Material Processing and Characterization (NCMPC – 2019) organized by PES Institute of Technology & Management, Shivamogga and Co-sponsored by Institute of Engineers, INDIA, on 20th May 2019.
  • Presented a paper titled as “Power Generation by using Kinetic Energy of Exhaust Gases from an Internal Combustion Engine” in National Conference on Material Processing and Characterization (NCMPC – 2019) organized by PES Institute of Technology & Management, Shivamogga, and Co-sponsored by Institute of Engineers, INDIA, on 20th May 2019.
  • Fluid Mechanics
  • Heat Transfer
  • Elements of Mechanical Engineering
  • Computer Aided Engineering Drawing
  • Energy Engineering
  • Computer Aided Machine Drawing