Faculty Details
Dr. Preetham B M
Assistant Professor
Email :preethambm@pestrust.edu.in
Educational Qualification :
B.E in Mechanical Engineering, M. Tech in Machine Design, Ph.D in Mechanical Engineering (Heat Transfer)
Academic Experience :
16 Years
Dr. Preetham B M
Assistant Professor
Email :preethambm@pestrust.edu.in
Educational Qualification :
B.E in Mechanical Engineering, M. Tech in Machine Design, Ph.D in Mechanical Engineering (Heat Transfer)
Academic Experience :
16 Years
- “Numerical Simulation Of Air Flow In Naturally Ventilated Attics For Different Attic Geometries” International Journal of Heat Transfer(IJHT),Wiley publications,02 January 2022 https://doi.org/10.1002/htj.22416
- Research work and Paper entitled “Effect of Localised For Different Roof Geometries in Winterlike Boundary Conditions ” is under review for Journal of Heat Transfer,Wiley online publications.
- ‘Mono Composite Leaf Spring for Light-Weight Automobiles’ authored by Preetham B.M reviewedby experts in this research area and accepted by the board of ‘Blue Eyes Intelligence Engineering andSciences Publication’ which has published in ‘International Journal of Recent Technology and Engineering (IJRTE)’, ISSN: 2277-3878 (Online), Volume-8 Issue-3, September 2019. Page No.: 5377-5380. The B ImpactFactor of IJRTE is 5.92 for the year 2018. Published paper and Souvenir are available at:
- https://www.ijrte.org/download/volume-8-issue-3. Elsevier Scopus.
- Research work and Paper entitled “Numerical simulation of natural convection in a north light roof under winter day boundary conditions” is published in Mechanical Engineering for Sustainable Development,State-of-the-Art ResearchApple Academic Press, CRC press ,Taylor & Francis Group in January 2019.
- Published paper entitled “Design & Experimental Analysis of Helical Suspension Spring with Different Materials” in International Journal of Mechanical & Production Engineering Research & Development, vol-7,June2017,Indexed Copernicus value:60.6,NASS rating 3.11.
- Numerical Investigation of Air Flow and Temperature Distribution in a Trombe Wall System: A CFD StudyInternational Journal of Engineering &Technology.Vol 9 July 2017.
- DOI: 0.21817/ijet/2017/v9i3/170903S075
- Design and Fabrication of Fatigue Testing Machine of cantilever type,International Advanced Research Journal in Science, Engineering and Technology, Vol. 4, Issue 7, May 2017
- Maglev Windmill International Advanced Research Journal in Science, Engineering and Technology REPSE-17 Vol. 4, Special Issue 7, May 2017
- Finite Element Method, Marks Boopa M6, Suggi Publications,2016
- Presented paper entitled “Effect of Thermal boundary Conditions on Natural Convection in Roof” in National Conference in Advances in Mechanical Engineering organised by department of mechanical engineering,JNNCE,Shimoga during20th -21st APRIL 2018
- Presented a Paper entitled “Numerical simulation of Natural Convection in a North Light Roof under winter day boundary conditions”at the first international & 18th ISME conference on Mechanical Engineering: Enabling Sustainable Development (ISME-2017) during 23rd to 25th February 2017 organized by NIT Warangal,Telangana State
- Presented paper entitled “Design & Static Analysis of Helical Suspension Spring with different materials on 15th& 16th May2017, national conference REPSE-17 in Two days national conference at SVCE,Bangalore.
- Presented paper entitled “Design and Fabrication of Personal Transporter” at National Conference on Innovative Trends in Mechanical Engineering”, 21st and22nd April 2016, SVCE, Bengaluru.
- Presented a Paper entitled “Design and Analysis of An Automotive Bumper Beam In Low Speed Frontal Crashes. “Indian ceramic society, Karnataka chapter Sponsored “National Conference on Innovative Trends in Mechanical Engineering, 12thand 13thFebruary 2016, Christ University, Bengaluru.
- Presented paper titled “Natural Convection Heat Transfer Through A Triangular Cavity” in National conference on Recent & Emerging Trends in Mechanical Engineering at SKIT on 8th May 2015
- Presented paper “A steady state heat transfer analysis of a semi circular plate with prescribed boundary conditions by using polar Laplace equation”, 25th& 26th March 2015 two days national level techno conference at SVCE, Bangalore.
- “Effect of Heat Flux Boundary Conditions on Natural Convection in a Square Cavity” Dr. K. N Seetharamu, Dr. Aswatha, B M Preetham, Santosh K B, proceedings of National conference on innovations and emerging trends in mechanical engineering, NCET, Bangalore.
- Presented paper “Finite Element Modelling & Analysis of Connecting Rod of an I.C Engine”, 25th& 26th March 2015 two days national level conference at SVCE, Bangalore.
- Participated in Three days “Virtual Workshop on Scholarly Publishing Tools and Tips” in Bangalore Institute of Technology, Bangalore from 15-17th February 2023.
- Attended two days seminar on “Hydraulics and Pneumatic drives for industrial applications”inSJCIT,Chickkaballapur on 20-21 December 2019.
- Participated and successfully completed the E-Quiz on “Finite Element Analysis”conducted by Department of Mechanical Engineering, S J C Institute of Technology, Chickballapur-562101 on 7/11/2020.
- Participated and successfully completed Online Quiz on “Mechanics of Materials” conducted by Department of Mechanical Engineering, S J C Institute of Technology, Chickballapur-562101 on 7/18/2020
- Attended webinar on topic “Supercritical Carbondioxide Power Cycles” by Dr.G S V L Narasimhan,Chief Research Scientist,Department of mechanical engineering,IISC,Bangalore on 24/07/2020
- Leadership talk with ShriDipendraManocha, (Motivational Speaker) organized by
- MHRD Innovation Cell
- One day seminar on “Renewable Energy Resources & Sustainability” on 20th October 2016 at SKIT, Bangalore.
- Organized and attended the three days industrial training program on “Applications of mastercam x6, hydraulics & pneumatics” from 17-19thnovember 2016
- Participated in Three Days Workshop on “Research Methodology & Latex” organized by VTU e-learning Center,Mysuru from 20-22 December 2016
- One day seminar on “CFD & Simulation Studies in I C Engines” on 12thApril 2013 at SVCE, Bangalore.
- Organized Two days Workshop on “Skill Enhancement in Industrial Automation” in association with KGTTI, Bangalore.” on 4th and 5th March 2016
- Organized & attended international seminar on “Challenges & opportunities in Cold storage Technology” at SVCE, Bangalore on 17th& 18 August 2015
- Organized All India seminar on “Advanced manufacturing & applications of polymer-metal-matrix composites” organized by SVCE Bangalore in association with NDRF & the Institution of Engineers on 18th,19th& 20th March 2015
- Four days workshop on “Effective & Strategic leadership for Excellence” organised by international academy for competency Enhancement, Bangalore from 23rd -26th 2014
- Organised national symposium on “Automation & Robotics-applications in agriculture and allied disciplines” on 20th& 21st September 2013
- Attended online training program for “Microsoft office 365” product on 4/08/2020 at NMIT,Bnaglore
- Attended five days online faculty development program on “Advances in Mechanical Engineering” organized by department of mechanical engineering, Jyothi Institute of Technology, Bangalore, held from 11thjuly 2020 to 15thjuly 2020
- Attended two days faculty development program on “Hydraulic and Pneumatic drives for industrial applications” inSJCIT,Chickkaballapur on 20-21 December 2019.
- Five Days FDP on “Research Paper, Project Preparation & Documentation” from 17th to 21st Jan 2017 at SVCE, Bengaluru
- Two Days Faculty Development Programme on “Applications of MATLAB for Mechanical Engineers” at SVCE, Bengaluru from 20th and 21st February 2016
- Five Days FDP on “Ansys-solutions for General Mechanical Engineering problems” at KSIT,Bangalore from 23rd-27th February 2015
- Five Days Faculty Development Program on “Emerging trends in mechanical engineering “ from 21st – 25th January at 2015 SVCE Bangalore
- Three Days FDP on “Design Engineering Lab” at KSIT,Bangalore from 16th,17th&18th October 2014
- Three Days FDP on “Advanced Computational Fluid Dynamics”organised on 14th,15th& 16th August 2014 conducted at PES University,Bangalore
- One week Faculty Development Program on “Energy prospects & challenges” organized by SVCE Bangalore from 20th to 25th January 2014
- Faculty Development Program on “Basic Concepts & Applications of Finite Element Methods” from 6th to 17th july2009 at PESIT,Bangalore
- Professional Memberships: ISTE, IEI
- Design Of Machine Elements-I
- Design Of Machine Elements-II
- Mechanics of Materials
- Experimental Stress Analysis
- Computer Aided Machine Drawing
- Computer Aided Engineering Drawing
- Elements of Mechanical Engineering
- Product Life Cycle Management
- Tribology
- Finite Element Analysis