Faculty Details
Mr. Malteshkumar Deshpande
Assistant Professor
Email :malteshkumar.d@pestrust.edu.in
Educational Qualification :
B.E in Mechanical Engineering, M.Tech in Machine Design
Academic Experience :
7 Years
Mr. Malteshkumar Deshpande
Assistant Professor
Email :malteshkumar.d@pestrust.edu.in
Educational Qualification :
B.E in Mechanical Engineering, M.Tech in Machine Design
Academic Experience :
7 Years
- Harikiran M.P,Rohith M.S,Malteshkumar Deshpande,Sudheer Kini K, “Study on Mechanical Properties of Al 2017 HMMC’s” International Journal of Engineering Research & Technology (IJERT),Volume 7, issue 07, ISSN: 2278-0181, 2019.
- Gururaj Lakshman Naik,Girisha L, Malteshkumar Deshpande, Mahanthesh M R, “Characterization of Graphene Reinforcement aluminum nano composites by squeeze cast technique”International Journal of Engineering Research & Technology (IJERT),Volume 7, issue 07, ISSN: 2278-0181, 2019.
- Girisha L,Malteshkumar Deshpande, Harisha G V, “ Mechanical characterization of asbestos free polymer based brake liners”International Journal of Engineering Research & Technology (IJERT),Volume 7, issue 07, ISSN: 2278-0181, 2019.
- Malteshkumar Deshpande,Girisha L, “ Design and Performance of ball milling for powder metallurgy composites” International Journal of Engineering Research & Technology (IJERT),Volume 7, issue 07, ISSN: 2278-0181, 2019.
- Girisha L,Malteshkumar Deshpande,Gururaj Lakshman Naik,Mahanthesh M R, “Mechanical Characterization of Nanomaterial Reinforced Aluminum-based Hybrid nano composites” Advanced Nano Research, AIJR Publications, Volume-2, Issue-1, pp 32-41, ISSN: 2581-5164, 2019.
- Harish G V ,Girisha L, Malteshkumar Deshpande, Mahanthesh M R, “Sliding Wear Behavior of Epoxy Based Composites” International Journal of Engineering and Advanced Technology (IJEAT) ISSN: 2249-8958, Volume-8 Issue-5, June 2019.
- MR Mahanthesh, L Girisha, Malteshkumar Deshpande, Shreyas Babu, DC Shivananda, “Modelling and Simulation of Below-the-Hook Lifting Device Balanced C-hook for Load to Investigate the Static and Model Analysis for Various Grades of Steels by Numerical Method” Journal of Modeling and Simulation of Materials, AIJR Publisher Vol 3 Issue 1, 2020
- Naik, G. L., M. Deshpande, D. C. Shivananda, C. P. Ajey, and G. C. Manjunath Patel. "Online Teaching and Learning of Higher Education in India during COVID-19 Emergency Lockdown."Pedagogical Research6, no. 1 (2021).
- M Rajkumar, N Senthil Kannan, M Bruhathi, D Malteshkumar, L Girisha, A Felix Sahayaraj, Ram Subbiah, “Cryogenic treatment and taguchi optimization of Haynes alloy”, Materials Today: Proceedings, Elsevier,2021
- Gururaja L Ajey C.P, Girisha Lakshman Naik, Malteshkumar Deshpande, Mahanthesh M.R, “Performance Enhancement and Effectiveness of Heat Exchangers Using MWCNT/Graphene Based Nanofluid”, Nano Progress, Vol 3 Issue 5, 47-52, Ariviyal Publishing, 2021
- Received Design Patent for “Cost Effective Ventilator Using CO2 Laser Cutting Machine For Covid-19”from Government of India 2021.
- Sudheer kini K, Malteshkumar Deshpande, Ajith K, Alim “ Numerical analysis of fatigue crack growth in a rotating disc with bolt holes using XFEM”, International conference on Advances in Mechanical Engineering Sciences ( ICAMES-17), held at P.E.S College of Engineering Mandya on 21st and 22nd April 2017.ISBN: 978-81-932966-3-9.
- Amruth M, Malteshkumar Deshpande, “Design and Analysis of Tow rod system capable of withstanding 69 Ton Tensile load”, National Conference on Research in Science, Engineering and Management (NCRSEM-17), held at P.E.S Institute of Technology and Management Shivamogga on 20th May 2017.
- Ganesh U.L, Malteshkumar Deshpande, “ Zero Turn Vehicle”,National Conference on Advanced Research in Science, Engineering and Management, held at P.E.S Institute of Technology and Management Shivamogga on 26th May 2018.
- Vinod V Rampur,Malteshkumar Deshpande, “ Design and Development of Forklift for material handling in warehouses”National Conference on Advanced Research in Science, Engineering and Management, held at P.E.S Institute of Technology and Management Shivamogga on 26th May 2018.
- Ajey C P,Malteshkumar Deshpande, “Manually Operated multiple adjustable seed sowing Machine”National Conference on Advanced Research in Science, Engineering and Management, held at P.E.S Institute of Technology and Management Shivamogga on 26th May 2018.
- Mr.Sunil M E, Mr.Shamantha G S, Mr.Chethan L S, Mr.Malteshkumar Deshpande, “Challenges for Accreditation in Indian Higher Education Institutions”National Conference on Higher Education in India: Challenges and Opportunities-held at P.E.S Institute of Technology and Management Shivamogga on 15th Nov 2019.
- Dr. Girisha L,Mr.Malteshkumar Deshpande, Ajey C P, Mr.Shivananda D C “ Present Scenario of Mechanical Engineers and its Future challenges: Academic Perspective” National Conference on Higher Education in India: Challenges and Opportunities-held at P.E.S Institute of Technology and Management Shivamogga on 15th Nov 2019.
- Mr.Vinod V Rampur, Mr.Ashok R Banagar, Mr.Ganesh U L,Mr.Malteshkumar Deshpande“Higher Education in India: Issues,Challenges and Pathways”held at P.E.S Institute of Technology and Management Shivamogga on 15th Nov 2019.
- Mr.Malteshkumar Deshpande, Dr.Girisha L, Mr.Mahanthesh M R, Mr. Prashanth H R “A Study On Design, Fabrication And Testing Of Portable Ball Milling Machine”Second International Conference on Advanced Materials & Technology (ICMAT-20)Department of Polymer Science S J College of Engineering (SJCE) JSS Technological University Mysore on 16th to 19th January 2020.
- TEQIP-III Sponsored training program on Pedagogy Training in Technical Education, held at VTU Human Resource Development Centre (VTU-HRDC),Center of PG studies Muddenahalli from 16th – 20th January 2018.
- Faculty Development Program on Open Foam Framework- Essential Computational Fluid Dynamics, held at Department of Mechanical Engineering, P.E.S Institute of Technology and Management Shivamogga on 9th April 2019.
- Faculty Development Program on Application of Mathematics in Engineering and Science, held at Department of Mathematics, P.E.S Institute of Technology and Management Shivamogga on 29th April 2019.
- TEQIP 1.3 Sponsored Workshop on Processing and Characterization of Metal Matrix Composites, held at Department of Mechanical Engineering, S J C Institute of Technology Chickballapura from 15th July to 19th July 2019.
- APPROVED FDP FROM AICTE THROUGH NPTEL COURSE “Nanotechnology, Science and Applications” (1Week), Jul-Sep 2019
- Frontiers in Advanced Materials, Manufacturing and Sustainability, held at Department of Mechanical Engineering, P.E.S Institute of Technology and Management Shivamogga from 9th Jan to 11th Jan 2020.
- FDP on “Technology Advancements in Mechanical Engineering” (TAME-2020),Organised by Dept. of Mechanical Engineering in assosciation with ISME, Ananthlakshmi Institute of Technology and Sciences, from 26th May- 28th May 2020.
- FDP on “EMERGING ENGINEERING MATERIALS”, Organised by Dept. of Mechanical Engineering in assosciation with ISME, Ballari Institute of Technology and Management Ballari, from 1st June – 5th June 2020.
- Advances in Thermo fluids and Turbo machines, Organised by Dept.of Mechanical Engineering Satyug Darshan Institute of Engineering & Technology, Faridabad, from 6th June 2020 -10th June 2020
- “Advances in Machining Processes”, held at Dept. of Mechanical Engineering, PESITM, Shivamogga, from 17th June -19th June 2020.
- “Three-day FDP on Fracture Mechanics” held at Dept.of Mechanical Engineering, PESITM, Shivamogga, from 24thJune -26th June 2020.
- Industry 4.0 ; Advanced Manufacturing, Organised by Dept. of Mechanical EngineeringK S R M College of Engineering Kadapa, from 18th June-20th June 2021.
- Data analysis and Artificial Intelligence for Mechanical Engineers, Organised by Dept. of Mechanical Engineering, Nitte Meenakshi Institute of Technology, Bengaluru, Karnataka, from 28th June-2nd July 2021.
- AICTE Training and Learning (ATAL) Academy online Elementary FDP on “ Novel Material for Next Generation Applications”, Organised by ATAL FDP Department of Mechanical Engineering MS Ramaiah Institute of Technology, Bengaluru, from 12th July – 16th July 2021.
- “Automotive Friction Materials”, Organised by Department of Automobile EngineeringSRM Institute of Science & Technology Kattankulathur Tamil Nadu, India.from 13th Dec 2021 to 17th Dec 2021
- “Introduction to Python”, Organised by Department of Master of Computer ApplicationsMaharaja Institute of Technology Mysore. Karnataka ,India, from 20th Dec 2021 to 24th Dec 2021.
- “The Joy of Computing Using Python”, IIT MADRAS SWAYAM/NPTEL COURSE(APPROVED FDP FROM AICTE THROUGH NPTEL COURSE), 1 ½ week, during JAN – APR 2022.
- Professional Membership: ISTE
- Automation and Robotics
- Elements of Mechanical Engineering
- Computer Aided Engineering Drawing
- Material Science
- Mechanical Vibration
- Computer Aided Machine Drawing
- Tribology